DAVIS Weather Wizard III Installationshandbuch

Stöbern Sie online oder laden Sie Installationshandbuch nach Wetterstationen DAVIS Weather Wizard III herunter. DAVIS Weather Wizard III Installation manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 16
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Product # 7425W, 7425WM, 7425WS, 7425WSM, 7440W, 7440WM, 7440WS, 7440WSM
W
IRELESS
W
EATHER
S
TATION
I
NSTALLATION
M
ANUAL
This manual covers installation of the wireless weather station. Some fea-
tures discussed (such as barometric pressure and humidity) are only avail-
able with the Wireless Weather Monitor II
®
. This manual also shows
installation with the solar power option, which may not be included in
your wireless weather station. Other manuals included with the station
cover the operation and maintenance of the console and sensors.
C
OMPONENTS
The wireless weather station includes the following components. Please
make sure you have everything you need before beginning.
Wind Cups
Sensor Array
Extension
Tube
Power Adapter
2nd Power Adapter
(not supplied with
solar-powered
stations)
Weather Station Console
Anemometer
1-1/8"
Saddles
5/16" Flat Washers
5/16" x 1-1/2"
U-Bolt
5/16" Lock Washers
5/16" Hex Nuts
5/16" x 3"
Lag Screws
5/16"
Flat Washers
Cable
Tie
Allen
Wrench
3 Volt Lithium
Transmitter Battery
(not supplied with
solar-powered
stations)
#8 x 3/4"
Pan Head Screws
(for mounting Console)
Debris Screen
(place inside
Rain Collector Cone
after installation)
This hardware
comes installed
on Sensor Array:
#12 x 1-1/2"
Pan Head Screw
#12 Lock Washer
#12 Hex Nut
Rain
Collector
Field Case
Seitenansicht 0
1 2 3 4 5 6 ... 15 16

Inhaltsverzeichnis

Seite 1 - OMPONENTS

Product # 7425W, 7425WM, 7425WS, 7425WSM, 7440W, 7440WM, 7440WS, 7440WSM W IRELESS W EATHER S TATION I NSTALLATION M ANUAL This manual covers inst

Seite 2

Page 10 Wireless Weather Station Silent Operating Mode Dip switch #4 on the receiver allows you to set the console to either emit audi-ble warnings o

Seite 3 - SSEMBLING

Mounting the Sensor Array Page 11 M OUNTING THE S ENSOR A RRAY The sensor array has been pre-assembled for easy installation. However, you will

Seite 4 - Snip the black cable tie

Page 12 Wireless Weather StationImportant: Mount Station Pointing SouthThe station’s wind direction is calibrated as if the horizontal part of the an

Seite 5 - Assembling the Station Page 5

Mounting the Console Page 13Securing the Sensor ArrayAfter mounting the sensor array, secure the sensor array to the extension tube as shown below.Pow

Seite 6 - Lithium Battery

Page 14 Wireless Weather StationTROUBLESHOOTINGPlease check the troubleshooters listed below if you experience a problem with your station. Then, if

Seite 7

Specifications Page 15pointing south. Or, if your station points in a direction other than south, check that you have recalibrated the weather vane c

Seite 8 - OCATIONS

Product Numbers: 7425W, 7425WM, 7425WS, 7425WSM, 7440W, 7440WM, 7440WS, 7440WSMDavis Instruments Part Number: 7395-300Wireless Weather Station Install

Seite 9 - (default)

Page 2 Wireless Weather Station T OOLS AND M ATERIALS N EEDED In addition to the components listed above, you may need some of the follow-ing too

Seite 10 - RECEIVER DEFAULT SETTINGS

Assembling the Station Page 3 A SSEMBLING THE S TATION Getting Started Follow the steps below to assemble your station. At various stages of thi

Seite 11 - Protection Systems

Page 4 Wireless Weather Station 4. Prepare the rain collector for use. Detach the black rain collector cone from its base by rotating the cone coun

Seite 12 - Sensor Array

Assembling the Station Page 5 6. If all is well, re-attach the mounting base as shown below. Use the standard setup unless you have the optional We

Seite 13 - MOUNTING THE CONSOLE

Page 6 Wireless Weather Station 7. Open the sensor array field case with a flat-bladed screwdriver and apply one of the power options indicated below.

Seite 14 - TROUBLESHOOTING

Choosing Locations for the Sensor Array and Console Page 7 8. Check all of the readings on your display to be sure they appear correctly (i.e., not “

Seite 15 - SPECIFICATIONS

Page 8 Wireless Weather Station T ESTING P ROPOSED L OCATIONS Test your proposed console and sensor locations to ensure successful data transmissio

Seite 16

Dip Switch Settings Page 9 7. Once you are finished testing, flip dip switch #4 on both the transmitter and receiver back to their original positions t

Kommentare zu diesen Handbüchern

Keine Kommentare