Davis Swim Stirrup Bedienungsanleitung PDF herunterladen

Follow this procedure for

cleat installation:

1. Position the deck cleat on a flat surface with the ring

pointing toward the inside of the boat.

2. Use a pencil to mark the center of the three holes for

drilling.

3. Drill pilot holes using 1/16" (1.6 mm) bit or smaller,

making sure the drill is held perpendicular to the

mounting surface.

4. Double-check the position of the pilot holes using the

cleat; redrill if necessary.

Continued…

Proper Cleat Orientation:

cleat bearing the load.

Improper Cleat Orientation:

retaining ring bearing the load.

#1466

INSTALLATION INSTRUCTIONS

The Swim Stirrup

has been carefully engineered to

provide safe, easy access to small boats for swimmers

or water skiers. Proper installation and use will assure

years of dependable service. Read through these

instructions completely before beginning installation.

INSTALLING THE DECK CLEAT

The Swim Stirrup’s deck cleat is the critical point of

attachment between the stirrup and your boat, and must

be mounted properly to insure safe use of the device.

Choose a location on the boat that is away from the

motor and where a person entering the boat won’t inter-

fere with boat equipment or hardware. Here are some

suggestions:

Make sure the cleat is mounted to a surface which

can handle the load of an entering swimmer. The

maximum weight Swim Stirrup is designed to support is

300 lbs. (136 kg).

The cleat may be mounted either inside, outside, or on

top of the gunwale. Note that the cleat’s retaining ring

must always point toward the inside of the boat.

The ring prevents the rope from slipping off the cleat

when the Swim Stirrup is bounced by waves. It also

holds the rope in place when stored inside the boat

between uses. The ring is NOT designed to support

much weight—when pointed toward the inside of the

boat, the cleat will handle the load.

Gunwale

Mounting

Transom

Mounting

Open Bow

Mounting

Retaining

Ring

Cleat

Inside

Boat

Outside

Boat

1 2

Inhaltsverzeichnis

Seite 1 - INSTALLATION INSTRUCTIONS

Follow this procedure for cleat installation:1. Position the deck cleat on a flat surface with the ringpointing toward the inside of the boat.2. Use a

Seite 2 - ONE-YEAR WARRANTY

5. For most fiberglass or wood boats, follow the pilotholes using a 3/16" (4.8 mm) drill and use the three11/4 x 1/4 (3.2 x .65 cm) pan-head scre

Kommentare zu diesen Handbüchern

Keine Kommentare

Davis Swim Stirrup Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör fürs Wasser Davis Swim Stirrup herunter. DAVIS Swim Stirrup User Manual [it] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Zubehör fürs Wasser Davis Swim Stirrup