Davis 6322C Bedienungsanleitung PDF herunterladen (Seite 29)

Troubleshooting

“The wind cups are spinning but my console displays 0 mph.”

The signal from the wind cups may not be making it back to the display.

Remove the cups from the anemometer (loosen the set screw). Put the cups back

onto the shaft and make sure to slide them up the shaft as far as possible. Check

your cables for visible nicks and cuts. Look for corrosion in the WIND connector

on the SIM and on splices in the cable. If using an extension cable, remove it and

test using only the anemometer cable. Contact Technical Support and ask for a

wind test cable if the problem has not been resolved.

Note: If the anemometer is sending no data, the wind display indicates 0 speed and a north direction.

“The wind direction is stuck on north, or displays dashes.”

It is likely that there is a short somewhere between the wind vane and the

display. Check the cables for visible nicks and cuts. Look for corrosion in the

“WIND” jack on the SIM and on splices in the cable (if any). If possible, remove

any extensions and try it with the anemometer cable only. If none of these steps

get the wind direction working, contact Technical Support and ask for a wind

test cable.

“The wind cups don’t spin or don’t spin as fast as they should.”

The anemometer may be located where wind is blocked by something, or there

may be friction interfering with the cups’ rotation. Remove the wind cups

(loosen the set screw) and clear out any bugs or debris. Turn the shaft the cups

rotate on. If it feels gritty or stiff, contact Davis Technical Support.

Note: Do not lubricate the shaft or bearings in any way. When replacing the cups, make sure they are not

rubbing against any part of the anemometer head.

“Readings aren’t what I expected them to be.”

Comparing data from your ISS to measurements from TV, radio, newspapers, or

a neighbor is NOT a valid method of verifying your readings. Readings can

vary considerably over short distances. How you site the ISS and anemometer

can also make a big difference. If you have questions, contact Technical Support.

Contacting Davis Instruments

If you have questions about the ISS or Vantage Pro2 system, or encounter problems

installing or operating the weather station, please contact Davis Technical Support.

Note: Please do not return items to the factory for repair without prior authorization.

(510) 732-7814 – Technical Support phone, Monday – Friday, 7:00 a.m. – 5:30 p.m.

Pacific Time.

(510) 670-0589 – Technical Support Fax.

[email protected] – E-mail to Technical Support.

[email protected] – General e-mail.

www.davisnet.com – Download manuals and specifications from the Support section.

Watch for FAQs and other updates. Subscribe to the e-newsletter.

1 2 ... 24 25 26 27 28 29 30 31 32

Keine Kommentare

Davis 6322C Bedienungsanleitung Seite 29