Product # 6151, 6151C, 6161, 6161CINTEGRATED S ENSOR SUITE WITHFAN-ASPIRATED RADIATION SHIELDADDENDUM, REV BFor Vantage Pro® and Vantage Pro Plus™The
Page 10 Addendum, Rev B4. Gently place the mounting bracket on top of the radiation shield, being careful to line up the three screw holes and also be
Applying Power and Testing Communications Page 11Applying Power and Testing CommunicationsCabled Vantage Pro: Powering the ISS and Testing Communica-t
Page 12 Addendum, Rev BWireless Vantage Pro: Powering the ISS and Testing Communi-cation with the Console1. Connect the Solar Power Cable to the SIM a
Additional Mounting Options Page 13Additional Mounting OptionsRefer to this section in your ISS Installation Manual.Fan-Aspirated ISS Installation Opt
Page 14 Addendum, Rev BA low-current fan (#7759) is available that uses less power than the standard fan. This allows the solar-powered Fan-Aspirated
Theory of Operation Page 15Contacting Davis Instruments(510) 732-7814 for Technical Support, Monday – Friday, 7:00 a.m. – 5:30 p.m. Pacific Time. supp
Product Numbers: 6151, 6151C, 6161, 6161CDavis Instruments Part Number: 7395.152 Integrated Sensor Suite with Fan-Aspirated Radiation Shield Addendum,
Page 2 Addendum, Rev BComponents The Fan-Aspirated ISS includes these components:SolarPanel(wirelessmodelsonly)AspiratedRadiation ShieldDebris Screen(
Components Page 3The hardware shown here is provided for assembly and mounting: Additional Components on Vantage Pro PlusVantage Pro Plus includes an
Page 4 Addendum, Rev BTools for Installation• Small Phillips-head screwdriver • Scissors or wire-cutters• Adjustable wrench or 7/16" wrench• Comp
Preparing the ISS for Installation Page 5Disassemble the Radiation Shield1. Remove the three screws connecting the rain collector base from the mounti
Page 6 Addendum, Rev B2. Lift the rain collector base off of the mounting bracket. Tip: For easier re-assembly, mark the holes in the mounting bracket
Preparing the ISS for Installation Page 7Powering the FanThe Cabled ISS fan is powered by an AC-power adapter. The Wireless ISS fan is solar-powered a
Page 8 Addendum, Rev BConnecting Solar Power (Wireless ISS)1. Locate the Junction Board on the fan plate (See below).2. Connect the solar power cable
Preparing the ISS for Installation Page 9Reassembling the Radiation Shield1. Make sure the Temp/Hum sensor cable runs through the provided cable chann
Kommentare zu diesen Handbüchern