Davis Instruments, 3465 Diablo Avenue, Hayward, CA 94545-2778 U.S.A. • 510-732-9229 • www.davisnet.com® Rain Collector IIInstallation manualThis in
Components2Rain Collector Internal ComponentsThe illustration below shows the internal components of the rain collector, many of which are referenced
Prepare the Rain Collector3Prepare the Rain Collector1. Turn the rain collector upside down and remove the cone from the base by rotating the base unt
Test the Rain Collector II43. Separate an end cap from one side of the magnet.4. Slide the magnet, with the exposed end of the magnet first, into the
Install the Rain Collector II5Choosing a Location for the Rain CollectorKeep the following in mind when choosing a location for your rain collector:•Y
Adjusting the Rain Collector II66. Open the SIM housing on the ISS. Remove the foam insert and feed the rain collector cable up through the opening. P
Maintaining the Rain Collector II7change. Moving the screws in the positive (+) direction causes the bucket to tip more times (i.e. give a larger coun
Product Number: 7852 Part Number: 07395.275 Rain Collector II Rev A (1/24/12)This product complies with the essential protection requirement
Kommentare zu diesen Handbüchern