DAVIS Vantage Pro2 ISS Anleitung zur Fehlerbehebung

Vantage Pro2Console Manual™For Vantage Pro2 & Vantage Pro2 Plus Weather Stations™™Davis Instruments, 3465 Diablo Avenue, Hayward, CA 94545-2

Console Location72. Lean the kickstand out by pulling on its top edge.You’ll see the indentation for your finger at the top edge of the console.3. Sli

Console Location8Wall MountingThe console mounts to the wall using two keyholes located on the back of the case. To mount the console on a wall:1. Use

9Chapter 3Using Your Weather StationThe console LCD screen and keyboard provide easy access to your weather informa-tion. The large LCD display shows

Setup Mode10Screen 1: Active TransmittersScreen 1 displays the message “Receiving from...” and shows the transmitters being received by the console. I

Setup Mode11Screen 2: Transmitter ID configurationIf you have a cabled station, or if you have a wireless station and are using the default transmitte

Setup Mode12Note: Make a note of the ID selected for retransmit. The console that receives the data from the console you have selected to retransmit

Setup Mode13The more accurate you are, the better; however, a reasonable estimate will work, too.Screen 5: Latitude1. Press the < and > keys to

Setup Mode14Screen 8: Daylight Saving SettingsIn most of North America (except Saskatchewan, Arizona, Hawaii, and the Mexican State of Sonora); and Eu

Setup Mode151. Press the < and > keys to move from one numeral to another. 2. Press the + and - keys to adjust a numeral up or down. 3. To switc

Setup Mode16Screen 12: Rain CollectorThe tipping bucket in the Vantage Pro2 rain collector has been calibrated at the factory to measure 0.01'&ap

Vantage Pro2 Console Manual Document Part Number: 07395.234 Rev. K, 1/12/12For Vantage Pro2 Consoles # 6312 & 6312CAnd Vantage Pro2 Weather Statio

Setup Mode17Note: This setting determines when the yearly rain total is reset to zero. Davis Instruments recommends a January rain season setting (th

Current Weather Mode18Current Weather ModeIn the Current Weather Mode you can display the current data readings from your sta-tion, select units of me

iTable of ContentsWelcome to Vantage Pro2TM ...1Console Featur

1Chapter 1Welcome to Vantage Pro2TMWelcome to your Vantage Pro2 Weather Station console. The console displays and records your station’s weather data,

Vantage Pro2 Options2Console ModesThe console operates in five basic modes: Setup, Current Weather, Highs and Lows, Alarm, and Graph. Each mode lets y

Vantage Pro2 Options3Optional AccessoriesAccessories are available from your dealer or may be ordered directly from Davis Instruments.Envoys: Wireless

4Chapter 2Installing the ConsoleThe Vantage Pro2 console is designed to give extremely accurate readings. As with any precision instrument, use care i

Installing Batteries54. Check to make sure the console runs through a brief self-test procedure successfully. On power up, the console displays all th

Console Location62. Ensure that the ISS cable is not twisted through the access port.Note: The ISS must be assembled and connected to the console so