DAVIS Vantage Pro ISS Retrofit Kit Installationshandbuch PDF herunterladen (Seite 16)

Page 16 Installation - ISS with External SIM

Procedure 3. Mount the new Temp/Hum module

1. Remove the Fan from the lower section of the radiation shield.

2. Remove the old Temp/Hum module from the radiation shield and replace

with the new Temp/Hum module.

3. Reinstall the fan making sure the sensor cable is set into the cable channel.

Fan Unit

Fan Deflector

Motor Connector

Junction Boa

Temp/Hum

Sensor Cable

Channel

Fan Pla

Temp/Hum

Sensor

Cable

Fan Removal and Installation

Installing the Temp/Hum Module

ISS2 SPARS RetroKit D011.fm Page 16 Wednesday, April 23, 2003 11:26 AM

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Keine Kommentare

DAVIS Vantage Pro ISS Retrofit Kit Installationshandbuch Seite 16