DAVIS Weather Talker Spezifikationen PDF herunterladen (Seite 15)

Weather Station Selection

General

1. €On the main Weather Display window, click Control Panel.

2. €Under Station Settings, click Station Type & Settings.

3. €Click the tab that corresponds to your station type.

Depending on the weather station type you select, there might be further options to

configure. When you have selected the appropriate model of station and click Close, you

are returned to the main Weather Display window. The Weather Display title bar displays

the weather station type you selected.

Initial setup for specific brands (if required)

Some brands of weather stations require additional configurations. See the list below for

specifics.

Dallas 1-wire setup

Use the station selection window to check that it has correctly identified your buttons.

1. €On the main Weather Display window, click Control Panel.

2. €Under Station Settings, click Station Type & Settings.

3. €Click the Dallas/AAG 1 tab.

On the setup page, you can also see the additional temperature sensor and the humidity

sensor/temperature readings (if you have one).

Dallas 1-wire station owners also need to set up the wind direction buttons. Click on View,

Setup Dallas 1-Wire Wind Direction And Rain to do this. If you have an ini.txt file that was

created by Weather 204 and the create list program provided by Dallas Semi, then you can

import that file to set the wind direction and rain/wind ibuttons. Next check that the

windspeed ibutton ROM ID has been correctly identified. If not, check what was reported

under View, WS2000/WMR900H/Dallas 1-wire Data Information. You can change the ROM

ID if it is wrong, and then click Save. If you have an extra temperature sensor, then the

ROM ID for it should be displayed here as well.

Davis setup

You do not have to configure the COM port release times unless you want to let Davis

Weather Link gain access to the weather station at some point to download data from the

Davis Datalogger. Davis owners also need to select their rain gauge resolution type.

You also need to select the data logger baud rate. The full version is for when you have a

rain gauge, humidity sensor, etc. In Weather Display, the wireless WMII is the same as the

WMII Full Version.

ELV/Conrad/WS2000/WS7000, Lacrosse, or WMR900h

These are all the same type of weather station. These stations all require you to do

additional initial setup.

1. €On the main Weather Display windows, click View.

2. €Under the Station Setup/Data Reports click WS2010-13/WS2500/ WMR900H

/Dallas 1-wire Data Information. Next set the outdoor temperature sensor to use. Choose

from the list once you have some sample data. Click on get data to get a sample to check

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 190 191

Keine Kommentare

DAVIS Weather Talker Spezifikationen Seite 15