DAVIS Weather Talker Spezifikationen PDF herunterladen (Seite 16)

Weather Station Selection

that you have the correct sensor. Also set the logging interval to 5 minutes.

Click on Set Names to allocate names to the sensors to appear with the data in this

window. You can also allocate a temperature/humidity sensor to use as your soil sensor, and

have it displayed on the main Weather Display screen above the wind speed dial.

Ultimeter

Make sure your weather station console is in datalogging mode at all times. Check this

after your restart Weather Display. If you have a U2000 that was manufactured before

2001, you might need to choose the No average speed in the data check box. You can

also choose whether you have a humidity sensor or rain gauge.

WMR-918H

A WMR-918H is actually a WMR-968. Try selecting the WMR-968 station type.

WS3600

You don't need to use Heavy Weather.

1. €Exit Heavy Weather.

2. €On the main Weather Display window, click Control Panel.

3. €Under Station Settings, click Station Type & Settings.

4. €Click the ELV/La Crosse/2010-13/WS2310/Hyundai/WS2500/WS2700/WS3600

tab.

5. €Select La Crosse WS2310/WS2310/WS2315/ELV/Conrad

WS2300/WS2310/WS2315/Hyundai WS05 etc.

6. €Click Close.

7. €On the Control Panel dialog box, under Station Settings, click COM Port.

8. €Select the COM port number, and then click OK.

9. €Open the settings file open3600.conf and make sure that the COM port number is set

correctly.

10. €On the main Weather Display window, click Exit, and then click Save and Exit.

11. €Start Weather Display.

Each minute the program fetch3600.exe runs and produces a log file called out3600.txt.

Make sure there is data in the file and that the time and date matches that of the console.

To get missing data when Weather Dispay starts, do the following:

1. €On the main Weather Display window, click Control Panel.

2. €Under Station Settings, click Data Logger.

3. €Click on Extract data at start up so that it displays ON.

Then the missing data will be logged to out23002.txt by the program histlog3600.txt.

Vaisala WXT510

Use the standard mode where the WXT-510 transmitts all data automatically in formatted

ASCII to its COM port using the additional setup software/hardware tool sold by Vaisala.

Source: http:/ / wiki. weather- watch. com/ index. php? title=Weather_ Station_

Selection&oldid=2057

Principal Authors: ANONIPEDITS:0

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 190 191

Keine Kommentare

DAVIS Weather Talker Spezifikationen Seite 16