Davis Universal Anemometer Interface for Vantage Pro2 Bedienungsanleitung PDF herunterladen (Seite 5)

Mounting on a vertical surface

1. Witha3/16ʺ(5mm)drillbit,drilltwoholesapproximately2ʺ(50mm)apart.

Useacarpenter’sleveltoensuretheholesarelevel.

2. Drilltw

omoreholes

7‐1/32ʺ(17.9cm)

belowtheupper

holes.

Flat

Washer

Lag

Screw

3. Insertthe1/4ʺx1‐1/2ʺ

lagscrewsthrough

theflatwashers,and

throughtheholesat

thetopoftheshelter

intothepost.Using

anadjustablewrench

or7/16ʺwrench,

tightenthelag

screws.

4. Insertthe1/4ʺx1‐1/2ʺ

lagsc

rewsthroughtheflatwashers,andthroughtheholesatthebottomof

theshelterintothepost.Usinganadjustablewrenchor7/16ʺwrench,tighten

thelagscrews.

Note: Remember to position the shelter so the solar panel has maximum exposure to the sun.

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Davis Universal Anemometer Interface for Vantage Pro2 Bedienungsanleitung Seite 5